• Reinforced durable case
• Auto cleaning with compressed air in automatic mode
• Polyplast filter elements with a high degree of cleaning (pr-in St. Petersburg)

Durability, reliability, automatic pneumatic cleaning, production in Russia, St. Petersburg. Always in stock in stock.

Description

A range of air temperatures is from -20 to +100 degrees, that is, you can work even with hot cement in a hot climate.

The filter is cleaned by compressed air in automatic mode.

• Photo report from the client’s factory after a year of work.

The principle of operation and design

The system consists of a filter with a pneumatic cleaning of filtering elements and a fan for absorption of air mounted on the top of the filter.

The filter is equipped with a pneumatic cleaning system and can operate around the clock with a high load.

All dust settles in the receiving container and, as it is filled, it can climb a loader and either re -used in production, or exported like garbage.

• Download price with price.
• See the news about the shipment of the second installation in Cemmix.

Technical characteristics

Filter with fan hard 1

• The supply voltage is 380V, electric power 3kW.
• Filter with a pneumatic cleaning system.
• The overall dimensions of VHDHSh, mm – 1600x1600x1100.
• Filter performance – 4000 m³/h. (not a fan, but a filter).

Filter with fan hard 2

• The supply voltage is 380V, electric power is 7.6 kW.
• Filter with a pneumatic cleaning system.
• The overall dimensions of VHDHSh, mm – 1800x1800x1100.
• Filter performance – 11500 m³/h. (not a fan, but a filter).

Buy a filter

For purchase, writeinfo@isilos.ruor call +7 (812) 408-41-82

Airklin filter line

1. Full description of the filter line.
2. Airklin Smart– filter for dispensers, small bunkers.
3. Airklin Medium– Silosov filter.
4. Installation of the Airklin ASP aspirationBased on a filter with an exhaust fan for difficult working conditions.
5. Price list.

Airklin hard 2

When the line of dry mixtures, or any other working with dry components, when transmitting material, for example from the silos to the dispenser, there is excess air, which should exit through a special hole. Since the air is very dusty, sleeve filters are installed on these holes.

However, on productive lines, these filters require frequent manual cleaning or cannot cope at all.

In these cases, the Airklin Smart filter is used in which the industrial filter element + automatic pneumatic cleaning is built.

Device and principle of operation

The filter consists of a case, a filtering element, an air supply and dispersion system and pneumatic regulators.

When installed on a bunker or mixer, the air passes through the filter element and the cleaned goes into the room.

The material besieged on the filter is poured back to the container.

Periodically, the filter is blown up and the dust settled on the filter is blown away into the container.

Clients

• The news of the shipment in polyplast with the photo.

Technical characteristics

The filter cleaning system consists of a purge system with an electromagnetic valve of “complete immersion” and ventilation pipes connected directly to the air tank.

Filter set

• The filter with 1 electromagnetic valve AR-2W41 is equipped with a control panel in a separate case in the form of a board with an electronic relay time of the XY-J04 time.
• Protection according to IP56.
• The relay module of the XY-J04 time allows you to set the duration of the pauses between the cleaning pulses (OR), and the scale for setting the duration of the cleaning pulse (CL).
• The control panel is supplied to the valve electromagnet already connected to the winding and the manufacturer tested by the manufacturer.

Competitive advantages

The operating temperature is -40C to 40C, subject to the rules for preparing compressed air.

Subtle setting of work time and downtime. The possibility of cyclic repetition of turning on and off. The ability to launch a signal from the external control system.

View prices for filters in the price list.

Drawings

Photo

Filter element

A filter on intermediate capacity

Airklin filter line

1. Full description of the filter line.
2. Airklin Medium– Silosov filter.
3. Hose filter with a tag airklin hard(versions 1 and 2)
4. Installation of the Airklin ASP aspirationBased on a filter with an exhaust fan for difficult working conditions.
5. Price list.

• Reinforced durable case
• Auto cleaning with compressed air in automatic mode
• Filter elements are produced in St. Petersburg, always in stock.

Durability, reliability, automatic pneumatic cleaning, production in Russia, St. Petersburg.

Always in stock in the warehouse.

Description

Six filtering elements with a total area of 24.5 sq.m. are mounted in the case, which allows you to filter up to 4000 cubic meters. air per hour.

A range of air temperatures is from -20 to +100 degrees, that is, you can work even with hot cement in a hot climate.

The filter is cleaned by compressed air in automatic mode.

Technical characteristics and advantages

• For connection, an air line with a pressure of 2 to 6 bar is used.
• Squeezed air should not contain moisture and oil vapors (compressed air standard according to GOST 17433-80).
• The filter cartridges are made of filter material with high performance.
• The permissible temperature of the incoming air +80 ° C is constant, +100 ° C maximum, -20 ° C.

• Download hygienic certificate
• Download the declaration of the Customs Union

Automatic pneumatic cleaning

The filter cleaning system consists of a purge system with an electromagnetic valve of “complete immersion” and ventilation pipes connected directly to the air tank.

• The filter is supplied with 1 electromagnetic valve AR-2W41 is equipped with a control panel in a separate case in the form of a board with an electronic relay module of the XY-J04.
• Protection according to IP56.
• The relay module of the XY-J04 time allows you to set the duration of the pauses between the cleaning pulses (OR), and the scale for setting the duration of the cleaning pulse (CL).
• The control panel is supplied to the valve electromagnet already connected to the winding and the manufacturer tested by the manufacturer.

Packaging and warranty

Warranty of 12 months from the date of shipment.

Packaging: Transport tray – 1×1.2 m, transport box – walls and OSP (OSB) cover 9 mm, timber frame 30×30 mm

Supply kit

1. Filter AAMIX AIR -800 -1 pcs.
2. Ring seal -1 pcs.
3. Fleet fasteners-1 Kt.
4. Transport tray – 1 pc.
5. Wooden transport box – 1 pc.
6. Passport for equipment – 1 pc.
7. Operating instructions – 1 pc.

Photo of the filter

Price

The price of the filter is 158900 rub. (VAT 20% is included), is always in the warehouse.

A set of filter elements – length 90cm, area of 24.5 kV.m. -47600 rubles.

Buy a filter

For purchase, writeinfo@isilos.ruor call +7 (812) 408-41-82

Airklin filter line

1. Full description of the filter line.
2. Airklin Smart– filter for dispensers, small bunkers.
3. Hose filter with a tag airklin hard(versions 1 and 2)
4. Installation of the Airklin ASP aspirationBased on a filter with an exhaust fan for difficult working conditions.
5. Price list.

Gabarit drawing

The installation consists of a filter of fine cleaning with automatic pneumatic cleaning of filter elements, an extract and a bunker for collecting dust.

This is a product completely ready to install, which immediately connects to machines, packaging and other dusting elements.

See the news about the shipment of the second installation in Cemmix.

The principle of operation and design

The system consists of a filter with a pneumatic cleaning of filtering elements, a fan for absorption of air, a bunker for collecting dust.

A pipe is connected to the bunker along which contaminated air goes. Due to the fact that the fan sucks air from the system, it is possible to connect the extract pipe to open dusting places for the fence of most dust in the system.

The entire incoming air passes through the filter elements and the already clean air enters back (to the room or to the street).

The filter is equipped with a pneumatic cleaning system and can operate around the clock with a high load.

All dust settles in the receiving container and, as it is filled, it can climb a loader and either re -used in production, or exported like garbage.

• Download price with price.
• See the news about the shipment of the second installation in Cemmix.

Technical characteristics

IMPORTANT! Production of more productive aspiration installations is possible, enter the data in the form below for the order.

Installation of ASP 1

• The supply voltage is 380V, electric power 3kW.
• Filter with a pneumatic cleaning system.
• The overall dimensions of VHDHSh, mm – 1600x2000x1100.
• The volume of the receiving container for dust 0.6 kub.m.
• Filter performance – 4000 m³/h. (not a fan, but a filter).

Installation of ASP 2

• The supply voltage is 380V, electric power is 7.6 kW.
• Filter with a pneumatic cleaning system.
• The overall dimensions of VHDHSh, mm – 1800x2200x1100.
• The volume of the receiving container for dust 0.6 kub.m.
• Filter performance – 11500 m³/h. (not a fan, but a filter).

Photo from production

Airklin filter line

1. Full description of the filter line.
2. Aerklin Smart– filter for dispensers, small bunkers.
3. Aerklin Medium– Silosov filter.
4. Hose filter with a tag airklin hard(versions 1 and 2)
5. Price list.

Drawings

Version 1

Version 2

3D model