The rotary feeder itself consists of two compartments of a rotating rotor. Accordingly, when rotating the rotor rotation, the upper compartment is filled, and the bottom is poured. Due to this, excessive pressure from the pneumatic system does not enter the bunker.

Download the full description of the RVC sector shutter

Technical characteristics of rotary feeders

1. Performance in liters for circulation – 5, 9, 14, 20, 38
2. Rotor speed – 10, 20, 30 rpm
3. Pressure difference between entrances up to 0.3 bar
4. Gaskets: greased, polished or high -temperature
5. The material and external coating of the rotor – nickel, Teflon, hardened blades

How to buy

We are the official representatives of the WAM company, which confirms the certificate that is updated every year.

Check our prices – they are dealerships! All equipment of the original production in Italy.

If you have found cheaper – ask for a dealer certificate and specify where production, most likely it will be China – a completely different quality and reliability.

For purchase, call +7 (812) 408-41-82 or write to the mailinfo@isilos.ru

Additional options

• Servationagance of the engine
• Thermoresistors
• Scraper for blades

Your benefits

The Stroy-Baton plant is not only the official dealer of WAM, but also introduces modern decisions of the transfer of materials and produces all related equipment. Our experts will not only help to choose the right products, but also create a full system for specific needs.

Additional information

• Gateway shutters like RV(WAM, Italy)
• VFS throttle shutters(WAM, Italy)
• VG gate shutters(WAM, Italy)

Typically, the shutters of this model are used when you need to submit the material to the pneumatic machine or vice versa to unload it from there. They are widely used for the dosed supply of powder materials.

Since the material is transmitted by the rotor, the pressure difference between the entrance and the output of the shutter is not an obstacle to its work. Also, due to this, the material is spilled out evenly, which makes it possible to control the speed of it.

Download the full description of the gate shutter RV

Technical characteristics of gateway shutters

1. productivity from 2 to 20 liters per turnover
2. Various speed speeds
3. pressure drop up to 0.3 bar
4. square entrances, RV model
5. Round entrances, model RVR
6. various materials from which rotor feeders are made for various needs
7. Versions for high temperatures

How to buy

We are the official representatives of the WAM company, which confirms the certificate that is updated every year.

Check our prices – they are dealerships! All equipment of the original production in Italy.

If you have found cheaper – ask for a dealer certificate and specify where production, most likely it will be China – a completely different quality and reliability.

For purchase, call +7 (812) 408-41-82 or write to the mailinfo@isilos.ru

Additional options

• Case made of cast iron or stainless steel
• Coating chromium, nickel, Teflon
• Lobes on the blades to increase tightness and reduce wear
• Plugs of rotor sections for working with sticky products
• Air or oil supply
• Mechanical variator drive
• Chain drive
• Version without a drive
• Revolution sensor

Examples of use

The Stroy-Baton plant is not only the official dealer of WAM, but also introduces modern decisions of the transfer of materials and produces all related equipment. Our experts will not only help to choose the right products, but also create a full system for specific needs.

Below is an example of using a gateway shutter in the dosage system of the company USG building system.

Storage material is suppliedSchnek transporterIn the weight hopper and out of it with a lock shutter to the pneumatic massagistan for production. The entire system was developed by specialists of the Stroy-Baton plant for the wishes of the customer.

Photo of the installed gateway shutter

Additional information

• Gateways of the RVC type(WAM, Italy)
• VFS throttle shutters(WAM, Italy)
• VG gate shutters(WAM, Italy)