In cases where reliable and continuous work in dosing systems or feeding systems is needed, the screws of these series are used.

The screws consist of a tray in the form of a tubular section, equipped, at least one unloading and one loading neck, carrier plate, strengthened to each end of the tray, a screw with bushings (TR) or connecting flanges (those) in the kit, two end bearings with a set of gaskets, intermediate bearings depending on the length of the label. In addition, the screws are equipped with a gearbox, corresponding to the features of use, and, in most cases, enhanced transmission.

• See what screws are in stock >>
• Download file with prices and types of transporters.
• Download the full description and calculation of screw transporters of the brand TE, TP in PDF format.

How to buy

We are the official representatives of the WAM company, which confirms the certificate that is updated every year.

Check our prices – they are dealerships! All equipment of the original production in Italy.

If you have found cheaper – ask for a dealer certificate and specify where production, most likely it will be China – a completely different quality and reliability.

For purchase, call +7 (812) 408-41-82 or write to the mailinfo@isilos.ru

Areas of application

Swings of TR and those are used for both the continuous and periodic work cycle in areas where the strength of the components of the screw and the ease of replacement of worn parts are one of the basic requirements.

The screws are used in the same areas of application as the Tu screws, when the lifting force of the latter no longer meets the requirements of the use (transportation or extraction from the silage when preparing a concrete mixture for cement, working with flying ash, fillers, siliceous dust, with bituminous construction solutions for hot and cold filler; in the construction industry – in the construction industry – with preliminary – with preliminary prepared mixtures for gypsum, with sands, additives; in the glass industry with calcium carbonate, soda, sand, etc.

Super -hearted screws, on the contrary, are used almost always for continuous work cycles in cement, gypsum plants, at the production of lime and in the mining region. Data of the screws are not intended for food.

Competitive advantages

• Powder coloring
• Wide selection of loading necks, end bearings and gaskets
• Additional loading/ unloading neck
• Additional observation hatches

Options

• Supporting pillows
• External bearings
• Alternative screws
• A predefined rotation indicator
• Direct drive, cardan, chain or belt transmission

 Additional information

1. Full list of speciesscrew conveyors

• Prices for warehouse screws
• Download passport

The screws consist of a tubular casing C, at least one unloading and unloading neck and with terminal welded rings, a rotating screw with connecting bushings in a kit, two terminal bearings with a set of long -term gaskets installed directly on the terminal rings, as well as intermediate bearings depending on the length of the machine. In addition, the screws are equipped with a gearbox, corresponding to the features of use.

• See what screws are in stock >>
• Prices for warehouse positions
• Passport for screws Tu, PDF

How to buy

We are the official representatives of the WAM company, which confirms the certificate that is updated every year.

Check our prices – they are dealerships! All equipment of the original production in Italy.

If you have found cheaper – ask for a dealer certificate and specify where production, most likely it will be China – a completely different quality and reliability.

For purchase, call +7 (812) 408-41-82 or write to the mailinfo@isilos.ru

General description

Tubular screws TU are produced only in a powerful version.

Tubular screws Tu are a modular multi -purpose system, which offers a huge number of standard solutions for the transportation of bulk materials.

Depending on the characteristics of the material, various models of the screws are proposed, which are used as conveyors or extractors from silos in concrete industry (cement, volatile ash, aggregates, siliceous dust), when working with bituminous construction solutions (hot and cold aggregate); with pre -prepared mixtures during construction (for gypsum, sand, cement, additives); in the glass industry (calcium carbonate, soda, sand, etc.); In foundations (sands, colloidal clay), and in many other industries.

Technical characteristics

• Powder coloring
• 7 diameters of the outer pipe
• The outer pipe complete with welded end rings (flanges), one loading and one unloading neck, an observation hatch under the first loading neck and under each intermediate bearing
• A screw of a screw welded to the inner pipe
• Heads complete with a set of gaskets
• Connecting couplings of an attached type shaft
• Lifting rym-bolt on each segment of a screw
• Different types of screws offered

Competitive advantages

• Compact design
• Small number of components and spare parts
• Versions that do not need technical support are offered
• Easy installation process
• Long service life
• Easy
• Small diameter high performance high loading capacity
• The modular project allows you to choose from the wide range of options that meet various matters of application
• Excellent quality and price ratio

Possible options

• Compact direct drive
• Direct cardan drive
• Chain drive
• Belt drive
• Woods with Zarains or flange
• REDORTORS
• If desired, gaskets, heads, intermediate bearings, special screws

Additional information

• Prices for warehouse positions
• Passport for screws Tu, PDF
• A complete list of speciesscrew conveyors

In addition to cement, the ES screw is also used to serve other bulk materials – lime, ash, marble flour, etc.

ES screws are made in Italy from high -quality steel with appropriate external processing and with powder coloring. The screws consist of a tubular casing with a loading and unloading neck and with terminal welded rings, a rotating screw with connecting bushings in a kit, two end bearings with a set of long -range gaskets installed directly on the end rings, as well as intermediate bearings depending on the length of the machine. In addition, the screws are equipped with a gearbox.

How to buy

We are the official representatives of the WAM company, which confirms the certificate that is updated every year.

Check our prices – they are dealerships! All equipment of the original production in Italy.

If you have found cheaper – ask for a dealer certificate and specify where production, most likely it will be China – a completely different quality and reliability.

For purchase, call +7 (812) 408-41-82 or write to the mailinfo@isilos.ru

In the warehouse

Shipping throughout Russia within 1-2 days after payment. We always have in the warehouse there are screw conveyors of the following models:

• Length 0.8 meters, 5.5 kW, 48 kub.m. per hour, angle 15-45%, diameter 219mm, model ES2190080
• Length 4 meters, 7.5 kW, 48 kub.m. per hour, angle 15-45%, diameter 219mm, ES2190400
• Length 6 meters, 7.5 kW, 48 kub.m. per hour, angle 15-45%, diameter 219mm, ES2190600
• Length 7.5 meters, 9.2 kW, 48 kub.m. per hour, angle 15-45%, diameter 219mm, ES2190750
• Length 10 meters, 11 kW, 48 kub.m. per hour, angle 15-45%, diameter 219mm, ES2191000
• Length 11.5 meters, 15 kW, 48 kub.m. per hour, angle 15-45%, diameter 219mm, ES2191150
• Length 6 meters, 11 kW, 65 kub.m. per hour, angle 15-45%, diameter273mm, ES2730600
• Length 10 meters, 15 kW, 65 kub.m. per hour, angle 15-45%, diameter273mm, ES2731000
• Length 11.5 meters, 15 kW, 65 kub.m. per hour, angle 15-45%, diameter273mm, ES2731150

Shipment of 3 working days from the warehouse in Moscow, delivery throughout Russia and the CIS. We are official WAM dealers.

Information

• Download the questionnaireand send it toinfo@isilos.ru
• Prices for warehouse positions
• Passport for screw conveyors ES, PDF

Buy a shneca conveyor online!

Options for produced ES screws (detailed description, installation drawings and much more are inFile with a description of ES screws):

• 1. Inner diameter – 114mm, 139mm, 168mm, 193mm, 219mm, 273mm, 323mm
• 2. Length (from the beginning of the input to the middle of the output) – 4.5m, 6m, 8m, 10m, 12m. The maximum length of the screw is about 20 meters (depending on the diameter).

The main advantages

• Easy.
• Long service life.
• Does not need technical support.
• Easy installation process due to universal loading and unloading neck.
• Excellent quality and price ratio.
• Small dimensions and compact installation.
• A small number of components and spare parts.

Performance and technical characteristics of advantages

• Powder coloring.
• 7 options for diameters of the outer pipe.
• The outer pipe complete with welded end rings (flanges), one loading and one unloading neck, an observation hatch under the first loading neck and under each intermediate bearing.
• A pipe with flanked standard cross -sections with a cross -section constructed by measurement.
• A round of a screw welded to the inner pipe.
• The heads complete with a set of gaskets.
• Connecting coupling shaft of an attached type.
• Lifle scum-bolt on each segment of the screw.
• Installed standard electric motor with flanges.

Buy a shneca conveyor online!

Possible options for ordering

• Different types of loading and unloading neck.
• Additional observation hatches.
• External bearings.
• Drive from the part of the unloading.
• The choice of gearboxes.

Additional information

1. A complete list of speciesSchool transporters

Buy Schneki transporter online

You can make an application for a purchase in the form below or call +7 (812) 408-41-82 or write to info@isilos.ru

[formbuilder:4]