The Aamix plant, a well -known manufacturer of construction equipment, produces and supplies in Russia and the CIS reliable and universal packages to valve bags for dry mixtures and cement.
Scope – plants for the production of dry mixtures, packing cement and other similar materials with a capacity of up to 10 tons per hour. For greater performance, see the packageFAS COM4 Rotor
FASS FAS COM2 Rotor is characterized by high performance and complete automation.
How to choose the right packageLook here.
Description of the work
- Cement or dry mixture is supplied to the pasping bunker.
- The valve bag is put on the pipe and immediately the bag is automatically triggered and the package cycle begins.
- When the desired weight is reached, the package automatically stops, the clamp automatically releases the bag.
- The bag is thrown away by a pusher on the conveyor for feeding on the packaging.
- The package is waiting for putting on a new bag.
That is, only one operation is required from the operator – put on a bag!
Our control panels are very thought out and controlled from the touch of the panel. You can configure the speed of packing, accuracy, air operating mode, keep records of shifts and much more.A detailed description here.
Description of the design and competitive advantages
- The use of components from the best world manufacturers.
- Automatic throwing of the bag.
- Automatic inclusion of the dosage cycle when serving the bag.
- Two dosages are fast + accurate (allows you to accurately dose a dry mixture).
- Convenient hatches of service and cleaning.
Control panel
Our control panels allow you to very flexibly set up packaging to different operating modes and different materials. Big and reliable touch. The screen allows you to see all the data and quickly reconfigure the package to new recipes.
Also, data can be transferred to the central control panel and further to the MES, ERP system.
News about packaging from customer production
- Gazprom (Moscow) is a high -performance plant, dry mixtures with vermiculite.See the news.
- Petroperlit (St. Petersburg) – a plant for the production of dry mixtures with perlite, 15 tons per hour.See the news.
- Hess AAC (Holland) – a factory of classic dry mixtures, 15 tons per hour.See the news.
- Shipment of the third package in Vladikavkaz. + News about installation in the same enterprise.
With all the pluses, the installation cost is quite competitive, through the use of Russian controllers and the full production cycle in Russia.
Important! There are very cheap packs on the market, but they do not work and, as a result, quite a few manufacturers contact us with a request to repair, set up or replace the purchased packages.News with a photo about replacing the packaging of another manufacturer.
Send a request to Fas-km2 online
Air and aspiration system
The use of drained compressed air (dew point +3 ° C) is required, purified of impurities of impurities (subtlety of filtering 25 μm), for this, the packing and preparation of compressed air production of Camozzi (Italy) are used as part of the package station.
The aspiration system is recommended to be done on the basis of the WAMAIR filter.
Complete
- Installation of packing
- Reception hopper for dry mixture 150 liters
- control panel with automatic controller
- The cap of the bag
- Auto will plan
- The system for determining the put on the bag
Technical characteristics
|
Type of bags for packing |
valve, sewn |
|
The width of the bags, see |
30-50 |
|
The length of the bags, see |
30-75 |
|
Valve width, see |
11 (9; 13) |
|
DOSION range, kg |
10-50 |
|
DOSION TIME OF THE SPEC, 30 kg |
about 10 seconds, depends on the settings |
|
Dosya, bags per hour |
up to 360 (depending on the settings) |
|
performance, tons per hour |
up to 10 tons per hour |
|
air consumption, cubic meter \ min |
0.4 |
|
Power, kW |
6 |
|
mass, kg |
290 |
Options
- If a mixture with a density of less than 1000 kg. \ Cub. M. Complex:
The throttle shutter is 80mm – 7600 rubles.
Pneumatic drive CP101 – 10800 rubles.
Pneumatic distributor V5V80 – 5200 rubles.
Mic23 position sensor – 3500 rubles.
When this valve is connected to the control panel, the tracking and automatic opening option \ closing this valve is activated. That is, nothing needs to be adjusted additionally, everything is already in the package algorithm. - Flat strip conveyorFrom 5 to 10 meters to supply bags from installation to the packaging on the pallet.
- System of aspiration based on the Wamflo filter (Italy).
- Switch conveyorFor the supply of cement or a mixture from the hopper to the package.
- Big-beags moltening system.
See also
- The price of installation of FAS CM2-Rotor for packing dry mixtures in valve bags canLook at the price list.
- Download the description of the installation in .pdf format
Automatic putting bags
Packing KM2 and KM4 can be equipped with installations for automatically putting on bags.
This solves the main problem of production of dry building mixtures – the operator’s work in difficult conditions.
Productivity also grows significantly. In the video, the work of our packaging with automatic putting bags at the factory of our client.
Video
- With the explanation of how the packing works
- from a working factory
This video was filmed in the fall of 2015 at the factory installed in St. Petersburg. The factory operates two of our packages with a capacity of up to 15 tons per hour in bags of 30 liters.
Other types of packages
- All equipment for packing produced by our plant.
- FAS COM4 Rotor– Less productive than this, cheaper.
- FAS COM3-Pneumo– completely pneumatic, for fragile or large materials (perlite, expanded clay, etc.).
- FAS-1– For packing crushed stone in plastic bags.
What else to read?
- Comparison of packageswith an algorithm of work, weighing, etc. –We recommend reading!
- Cement package– An article about how to organize it.
Concomitant equipment
- Ribbon conveyors– for bags or bulk materials.
- Cyclones– For air purification, be sure to pack.
- Silos– for storing the source materials.
- Fluckers of dry mixtures– for preliminary mixing of several materials.
- Factories of dry mixtures– for industrial production of dry building mixtures.
Certificates
We certify all our equipment for the confidence of our customers in quality. Certificates are also needed for inspection bodies and when licensing production.
Certificate of conformity
Declaration of conformity
Send a request to Fas-km2 online