WAM telescopic bootloaders are produced in Italy, used around the world and are the industry standard.
Loaders allow you to use cement trucks, tanks and open vessels tolessly load cement trucks.
To load cement trucks
Type – Bellojet Za.
Loaders are equipped with internal cones, inside of which the flow of the product passes, and external double corrugations to ensure dust removal. In the lower part, the Sint cone covered with a technical polymer, which has special sealing properties, providing a connection to the tank.
To download open ships
Type – ZX.
Provide loading with controlled ardor of dry dusty bulk products on ships, barges, as well as to open storage areas. Equipped with cones, inside of which the flow of the product passes, and external corrugers to remove dust.
How to buy
We are the official representatives of the WAM company, which confirms the certificate that is updated every year.
Check our prices – they are dealerships! All equipment of the original production in Italy.
If you have found cheaper – ask for a dealer certificate and specify where production, most likely it will be China – a completely different quality and reliability.
For purchase, call +7 (812) 408-41-82 or write to the mailinfo@isilos.ru
Description of the work
First, the bootloader falls from the initial position to the bottom of the vessel or to the cement carrier. As soon as the loader’s output touches the surface, the end sagging sensor of the cable, installed outside the drive housing, stops lowering the bootloader. The end switch inside the drive housing is triggered both with complete stretching and when the bootloader is completely folded. The loading of the product begins when the output of the silo shift is opened.
As soon as the bootloader has completely developed, the end switch inside the drive housing completes the loading cycle.
- Fast loading without dust
- Two lifting cables located outside the flow of the product, without wear, which could be caused by friction of the product
- Level sensors located outside the flow of the product
Technical characteristics
- Input diameter: 500 mm
- Maximum throughput: 850 m3/h
- Working temperature: -40 ~ 150 ° C
Photo
For purchase, call +7 (812) 408-41-82 or write to the mailinfo@isilos.ru