AAMIX Flow M42 Microder for Brewing Products

Sand microdosterAAMIX Flow M42 microdectors are designed for voluminous accurate dosing of various bulk and powder materials. Materials with increased coatings and medium stickiness are well dosed.

Microdrotes are fully produced at our plant in St. Petersburg, reliable Russian engines are used as the drive.

The scope of application

Microdrotes are widely used in the production of dry building mixtures, glass industry, chemical industry, at concrete plants and wherever there is a need for a periodic accurate dose of small doses of additives.

For example, in the production of dry mixtures in one kneader of 1 cubic meter. Often it is required to serve from 4 to 6 different additives in an amount of 1 to 5 kilograms.

Sometimes it is done manually, but this leads to errors and a deterioration in the quality of the mixture.

Therefore, microdosterers are usually used.

AAMIX Flow M42 microderies have a tile, which allows you to effectively dose powders with fibers and high stickiness.

Bruttle microdectorDescription of the work

Above the microdector is a receiving hopper with an addition. The microdant is configured for a certain feed speed, the standard speed of 105 cubic meters. per hour (you can configure another).

On the plant control panel, the right feed time is tuned and after that, before each batch, the dispenser automatically turns on and supplies the right amount of additive to the mixer.

Characteristics

1. The diameter of the dosing screw, mm

42

2. Material of the execution of the case

Article 3

3. Bulk seal

Graphite stuffing

4. Type of the bearing node

UCF 202

5. Type of the dosing screw

Unwilling

6. Dosing screw drive

NMRW 040-33-0.37-B3 (5AI 63 B4 2081/3081)

7. The speed of the dosing screw, rpm

33

8. Cable by the engine power of the dosing screw, kW

0.37

9. The drive of the tanker

NMRW 040-34-0.25-B3

(5AA 63 B6 2081/3081)

10. The speed of the enumber, rpm

34

11. consumed power of the engine of the enumber, kW

0.25

12. Called performance, dm3/h

60

13. Overall dimensions, mm.

  • Height
  • Width
  • Length

317

539

657

14. Mass, kg.

75

 

Complete

  • Corps with a reception funnel
  • Tor -nourish
  • DOSION SHREE

Options

  • Mechanical variator drive
  • Execution of food polymer or stainless steel
  • Explosion -proof execution of ATETY Zone 22
  • Vertical output
  • Square or round funnel
  • Electric or pneumatic vibrator
  • Dosing auger and pipe covered with a technical polymer Sint to provide a zero gap

Price and order

To order, write to info@isilos.ru or call +7 (812) 408-41-82

  1. The price of a typical microdector is indicated inPrice list

Photo from the load

Microdor of bulk materials

Microdorflower additives

See also

  1. AMIXFLOW SHREECHER Microderia conveyor, diameter 108mm.
  2. Swing conveyor for sand and difficult working conditions – Aamixflow Ta, diameters 219, 273mm.