Gunjet pneumatic buffes are designed specifically for large and superbty silos and bunkers, as well as for materials, with increased stickiness or difficult to pable.
Application
When storing large volumes of bulk materials, they often cite and, with a partial devastation of the silage or storage bunker, begin to unload from it with difficulty. At the same time, ordinary aeration systems sometimes do not lead to complete emptying of silage, due to the sticking of the powder (for example, cement or ash) on the walls, the formation of “mice mice” and other effects in it.
Especially for such cases, the well -known company WAM (Italy) developed the Gunjet air gun.
The principle of work
The principle of operation of the air gun is that a certain volume of air is accumulated in it (depending on the model from 0.3 to 5.6 liters) under pressure from 3 to 6 atmospheres. After the signal for the opening, the special valve is almost instantly opened and the air enters the silos (bunker) with the effect of the microvel. Due to this, the significant amount of material loses stability and begins to pour normally, and the walls of the silos (bunker) in which the material is stored are cleaned.
- Download price list with prices for pneumatic shoes >>
- Download full description of the air gun >>
- Download Installation Instructions >>
Technical characteristics
- 4 types of air packs (the most used PG040)
- Working pressure: from 3 to 6 bar
- Air consumption per cycle: from 0.3 to 5.6 liters
- Cement, flour, soda, potassium chloride, apatitis, coal, coke, slate, mineral fertilizers, fine -grained ore, medium crushing, clay, polystyrene and many others are used with materials.
View other WAM products for aeration of silos