After the dry mixture is packaged in valve bags (we lookinstallations for packing) They are laid on the euro and, as a rule, wound up in a stretch film.
To do this, a special machine is used on which the pallet is placed, the film is fixed, it turns on, the pallet begins to rotate, and the machine gradually lifts it to wrap the bags (see video below the page).
Such packaging protects dry mixtures from moisture and damage during transportation. At the same time, it is inexpensive, since the stretch film is very cheap.
Characteristics
- Smooth start/foot of the turning table;
- The turning table always stops in the same place;
- 12 point support for the turning table;
- Regulation of stretching stretch, rotary table speeds, lifting speed of an elevator of an everer stire-film;
- The ability to stop the table in any position;
- Built -in control control panel;
- Determination of the height of the packaging using a photo sensor;
- Available direct selection of an automatic or manual winding method;
- Winding programming;
- 3 built -in winding control programs + manual winding mode;
- The film tension is regulated by an electromagnetic brake;
Technical characteristics
| The diameter of the rotary table m | 1.5 |
| The speed of rotation of the table rpm | up to 10 |
| Maximum packaging height m | 2.0 |
| Maximum weight of kg packaging | 1500 |
| The width of the stretch film mm | 500 |
| The supply voltage v | 220, 1-phase |
| Power of the DV. turning table kW | 0.34, 90V |
| The overall dimensions of mm | 2500*1500*2315 |
| Consumable material | Streich film |
Video machine at work
At the end of the video, you can observe the work of our machine at the plant of dry mixtures.